Car Smoke Leak Detector Pipe EVAP Vacuum Leakage Diagnostic Tool Analyzer

Car Smoke Leak Detector Pipe EVAP Vacuum Leakage Diagnostic Tool Analyzer

NEW

Introduction

AUTOOL Car Smoke Leak Detector EVAP System Tester—an marvelously professional auto pipes Leak Smoke Tester, in line with the technical specifications of the car repair shop EVAP test. SDT208 greatly increases efficiency and helps us locate leaks from cars and motorcycles on our piping system within minutes, quickly and exactly, such as EVAP System Test、Intake System Test、Exhaust Systems Test，Turbo System Testing, Crankcase system test，Car Sealing Test, Various Pipe Fittings Test.

How to do leakage test ?

1. Fill 10ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover.

2. Disconnect the pipe that needs to be connected with detector.

3. Connect detector with DC12V battery, turn on the power switch, and the detector starts to work.

4. In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.

Full system diagnostics, don’t miss any leaks:

1. Crankcase System Test: Excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.

2. Intake System Test: Leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power.

3. Car Sealing Test: Poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof , etc.

4. Fuel Tank System Test: When there are gaps in the fuel tank and piping caused by improper installation or insufficient sealing of the fuel tank cap, it can cause leaks in the fuel tank system.

5. Turbo Test: The leakage of coolant would cause the engine to report high water temperature.Various Pipe Fittings Test: Smoke testing of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc.

6. EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling.

7. Exhaust System Test: Unpurified harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust.

Caution：

1. Standard Mode and EVAP Mode can NOT be turned on at the same time.

2. When you use this AUTOOL SDT208 Car Smoke Leak Detector EVAP System Tester for the first time, fill with 10ml oil . Please be careful NOT to beyond this range. 

3. The testing liquid : both liquid paraffin and baby oil are OK.

4. Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.

5. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.

6. During the process of leak detection, please keep away from smoke-sensitive parts.

7. Do NOT run the detector over 8 minutes continuously. It needs interval rest.

8.The detector has a smart protector,during operation, if the equipment senses the temp. above 75°C, the power supply will be automatically power off.

9. The round part of this detector has temperature, please be careful to avoid burns.

10. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.

1. Your valid phone number is very necessary for the shipping, otherwise we can’t guarantee that the package would safely arrives.

2. Any Customs tax applied to this package should be covered by buyers.

3. As has been stated on the eBay item description, Import duties, taxes and charges are not included in the item price and shipping charges. These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office.
　

What in Package:

1pcs * Car Smoke Leak Detector Tool Kit